Sterility test pump based on the principle of membrane filtration. The pump give positive pressure transmit liquid sample to the canister and filtered under positive pressure. After filtration, the filter membrane is washed to remove the antimicrobial agent of the product, and then the culture medium is filled in the filter to check whether the sample contains bacteria

Our company cooperated with National scientific research project group to complete the research and development, stereotype and production of “vaporized hydrogen peroxide sterilizer”. This sterilizer can vaporize the hydrogen peroxide to achieve the sterilization and disinfection effect, and the sterilization effect is faster and more efficient than the atomized hydrogen peroxide sterilizer, the using of it is safe and convenient.

It is suitable for sealing integrity testing of pharmaceutical packaging to prevent moisture, oxygen, and microorganisms from contaminating products. Medicines: bottled, bagged, boxed, ampoules, vials, cartridges, prefilled needles (PFS), (BFS), (FFS), etc.
Spray cans: plunger spray cans; bag-lined spray cans; "energy jacket" spray cans; flexible tube spray cans.

The on-line gloves Integrity Tester GT-2.0 produced by Beijing Neuronbc Laboratories is designed according to the positive pressure leak detector principle proposed by GB/T 25915.7-2010/ISO 14644-7:2004, and it is a dedicated instrument to detect the gloves leakage. The simple and easy design won't need any additional equipment, no need to remove the gloves, with fast detection speed and high precision.

The freezing point osmometer FPOSM-V2.0 produced by our company with independent research and development is in accordance with Raoul freezing point theory, based on the solution freezing point declined value proportional to the solution molar concentration, using high sensitivity of temperature-sensing element, to measure the freezing point of different solutions, so as to derive the osmotic pressure molar concentration. This theory has been widely used for the test and research of osmotic pressure molar concentration in the fields such as pharmaceuticals,pharmaceutical analysis, biological and food therapy

Model：IntegtestV4.0
Introduction

Integtest ® Serials Integrity Tester are designed for testing integrity of filters and filter systems . The State Pharmacopoeia and GMP specification requirements. The V4.0 Integrity Tester is compact, handy to use, and fully automated integrity test instrument, which performs bubble point, diffusion flow, enhanced bubble point, and water-based test for hydrophobic filters.

The on-line gloves Integrity Tester GT-3.0 are leak detector principle proposed by GB/T 25915.7-2010/ISO 14644-7:2004, and it is a dedicated instrument to detect the gloves leakage. The simple and easy design won't need any additional equipment, no need to remove the gloves, with fast detection speed and high precision.

Name：Full-Automatic Filter Integrity Tester


Model：IntegtestV1.1

Company：Beijing Neuronbc Laborataries Co., Ltd.

The respirator filter is designed for the sterilization purposes when material pot gas exchange of the pharmaceutical industry, food industry. The vent of the material pot and the storage pot is separated by the filter, and the gas in the pot can be discharged smoothly, and the microorganisms and particulate of outside can not enter the inside. The filter is manufactured according to GMP standard. Filter selection of hydrophobic PTFE membrane, filtration accuracy of 0.01um for a variety of bacteria and phage to 99.9999% filter. This filter can do bubble point test, also be carried out online steam disinfection.

Capsule filters are produced using pleated processing. Their structure is impact and filter area is large, applicable to filter solutions that have slow flow rate and large volume. Capsule filters are sealed by means of melting, free from glues and adhesives and therefore will not contaminate filtrate. They will experience 100% integrity test, purified water washing, and pressure test before delivery. Materials of capsule filters are selectable.

NBC-5100 is a new style particle counter with a flow rate of 28.3L/min (1 cfm), friendly interface and high-resolution color touch screen, easy to use. The model can confirm the class of the clean room and print out the test results quickly, and meets ISO 14644 requirements. The instrument measures the no. of particles in 8 particle size channels simultaneously, with 5000 samples record storage .It is widely used in measuring particles in clean rooms and in evaluating the quality of indoor air. It also used for testing the performance of HEPA filters.